F 250 4WD Super Duty V10-6.8L VIN V (2005)
Sunroof / Moonroof Motor: Service and Repair
Roof Opening Panel Motor
ROOF OPENING PANEL MOTOR
Removal
NOTE: The roof opening panel must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the roof
opening panel has been removed from the roof opening panel assembly, a new roof opening panel motor/module has been installed, or when a new roof
opening panel assembly has been installed. Refer to Roof Opening Panel Motor Initialization. See: Roof Opening Panel Motor Initialization
1. Remove the headliner.
2. Disconnect the roof opening panel motor electrical connector.
3. Remove the roof opening panel motor.
-
Remove the three bolts.
Installation
1. Connect the roof opening panel motor electrical connector.