F 250 4WD Super Duty V10-6.8L VIN V (2005)
12. Remove the seven screws (four outboard side, three inboard side) securing the seat adjuster tracks to the seat pedestal frame.
Installation
Manual seats
1. Place the seat tracks on the seat pedestal frame and install the seven screws (four outboard side, three inboard side).
2. Attach the fore/aft adjuster bar and install new pushclips on each side. Attach the seat assist spring.
Power seats
3. Connect the seat actuator motor electrical connector.
All seats
4. Install the front seat backrest.