F 250 4WD Super Duty V10-6.8L VIN V (2005)
1. CAUTION: Tighten the bottom caliper bolt before tightening the top caliper bolt.
CAUTION: Make sure the caliper pin boots are correctly seated to prevent damage to the guide pins.
Position the brake caliper and install the 2 bolts.
^
On F-250, F-350, tighten to 76 Nm (56 ft. lbs.).
^
On F-450, F-550, tighten to 63 Nm (46 ft. lbs.).
2. Using 2 new copper washers, position the brake flexible hose and install the brake caliper flow bolt.
3. Bleed the brake caliper.
4. Test the brake system for normal operation.