F 250 4WD Super Duty V10-6.8L VIN V (2005)
Thermostat: Service and Repair
Thermostat - 5.4L, 6.8L
Material
Removal and Installation
1. Drain the engine cooling system.
2. Remove the air cleaner outlet pipe.
3. Remove the 2 bolts, the thermostat housing, and the thermostat. Discard the O-ring seal.
^
Inspect the mating surfaces. Clean the sealing surfaces with metal surface prep.
^
Install a new O-ring seal. Lubricate the O-ring seal with clean engine coolant prior to installation.
^
To install, tighten to 10 Nm (89 inch lbs.).