F 250 4WD Super Duty V10-6.8L VIN V (2005)
Position the RH engine mount and install the 4 bolts.
^
Tighten to 63 Nm (46 ft. lbs.).
LH engine mount
2. CAUTION: Clean the engine mount-to-oil filter adapter and engine mount-to-chassis mating surfaces of any dirt or foreign material prior to
installation.
Position the LH engine mount and install the 4 bolts.
^
Tighten to 63 Nm (46 ft. lbs.).
All vehicles
3. Lower the engine into position.
4. CAUTION: Only use hand tools when installing the RH engine mount nut or damage to the engine mount can occur.
NOTE: RH shown, LH similar.
Install the 4 engine mount nuts.
^
Tighten to 175 Nm (129 ft. lbs.).
5. CAUTION: Only use hand tools when installing the transmission mount-to-crossmember nuts or damage to the transmission mount can occur.
Install the transmission mount-to-crossmember nuts.
^
Tighten to 103 Nm (76 ft. lbs.).