F 250 4WD Super Duty V10-6.8L VIN V (2005)
![background image](/ford/f_250_4wd_super_duty/v10-6.8l_vin_v/Page-3288001.png)
Fuel Gauge Sender: Service and Repair
Fuel Pump Module - Plastic Fuel Tank
FUEL PUMP MODULE - PLASTIC FUEL TANK
Lock Ring Wrench
Special Tool(s)
Removal and Installation
WARNING:
-
Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related component. Highly flammable
mixtures are always present and may be ignited. Failure to follow these instructions can result in personal injury.
-
Fuel in the fuel system remains under high pressure even when the engine is not running. Before repairing or disconnecting any of the
fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal injury or a fire
hazard.
1. NOTE: The fuel tank must be drained completely. Upon removal of the fuel pump module, the tank must be inspected for contamination.
Remove the fuel tank.