F 250 4WD Super Duty V10-6.8L VIN V (2005)
Removal and Installation
1. Disconnect the battery ground cable.
2. Disconnect the accelerator pedal position sensor electrical connector.
3. Remove the 3 nuts and the accelerator pedal position sensor assembly.
-
To install, tighten to 9 Nm (80 lb-in).
4. Remove the 3 bolts and the accelerator pedal position sensor support bracket.
-
To install, tighten to 25 Nm (18 lb-ft).
5. To install, reverse the removal procedure.