F 250 4WD Super Duty V10-6.8L VIN V (2005)
Driver safety belt buckle
4. Remove the front inboard track-to-seat pan bolt.
5. Loosen the rear inboard track-to-seat pan bolt to allow the removal of the electrical connector.
6. Position the electrical connector as shown and pull it through the seat opening.
Installation
1. NOTE: Make sure to tighten nuts to specification.
To install, reverse the removal procedure.
2. Check the active restraint system for correct operation.
Safety Belt Buckle - Front Captain's Chair
SAFETY BELT BUCKLE - FRONT CAPTAIN'S CHAIR
Removal and Installation
All vehicles
1. Remove the affected seat.
