F 250 4WD Super Duty V10-6.8L VIN V (2005)
23.
Coat the seal pump outer diameter square cut-seal with clean transmission fluid and install onto the pump with the white stripe facing out. See
Figure 59.
24.
Install the front pump using the aligner tools to help guide the pump correctly into place, then remove the aligner tools.
See Figure 60.
25.
Install the new front pump retaining bolts. Tighten the bolts in a star pattern to 27 Nm (20 lb-ft). See Figure 61.
26.
Install a new solenoid body gasket. See Figure 62.