ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Drive/Propeller Shaft > < A/C - Heater Core Electrolysis/Leakage|Page 6661
Page 2
background image

6. NOTE:  Clean grease deposits, dirt and rust from the stub shaft.

NOTE:  Inspect the stub shaft splines for nicks, gouges, or burrs. Remove with a file or emery cloth.

NOTE:  The driveshaft center bearing bracket must be installed with the deep flange rearward.

To assemble, reverse the disassembly procedure.
^

Lubricate the stub shaft spline with grease.

^

Install new driveshaft slip yoke boot clamps.

Drive/Propeller Shaft > < A/C - Heater Core Electrolysis/Leakage|Page 6661