F 250 4WD Super Duty V10-6.8L VIN V (2005)
Flywheel: Testing and Inspection
Flywheel Check
Flywheel Check
1. CAUTION: Do not use petroleum-based cleaning solutions.
NOTE: Always inspect the flywheel whenever the clutch is removed or installed new.
Using a suitable cleaning solution, clean the flywheel clutch surface.
2. Inspect the flywheel for:
^
surface cracks.
^
heat check.
^
glazing.
^
scoring.
^
scratches or grooves.
-
For minor damage, finish the flywheel surface with coarse emery cloth or with a fine grade (400 grit) sandpaper. To polish the surface,
stroke parallel to the machine lines.
3. Inspect the ring gear for:
^
worn, chopped or broken teeth.
