F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Brake Rotor/Disc: Service and Repair
Rear
Disc
Removal and Installation
All except Ford single rear wheel axle
1. NOTE: The brake disc is part of the wheel hub on all axles except the Ford 10.50-inch axle for single rear wheel applications.
Remove the hub.
2. Remove the rotor-to-hub bolts and separate the hub and rear disc brake rotor.
Ford single rear wheel axle
3. Remove the caliper.
All vehicles
4. Remove the disc.
5. To install, reverse the removal procedure.
