F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Cruise Control Servo: Service and Repair
REMOVAL
1. Disconnect the speed control servo electrical connector.
1
Push in on the tabs.
2
Disconnect the speed control servo electrical connector.
2. Remove the speed control servo bolts and bracket.
3. Remove the speed control actuator cable cap from the speed control servo.
^
Push in the locking arm on the speed control actuator cable cap and rotate the cap counterclockwise.
4. Disconnect the speed control core wire end from the speed control servo pulley.
1
Depress the spring retainer.
2
Slide the core wire end out of the speed control servo pulley.