F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Cruise Control Servo Cable: Service and Repair
REMOVAL
1. Remove the air cleaner outlet tube.
2. Remove the accelerator control splash shield.
1
Release the tab.
2
Remove the splash shield.
3. Disconnect the speed control cable.
1
Disconnect the speed control cable from the throttle body cam and position aside.
2
Depress the retaining clips to remove the cable from the bracket.
4. Remove the speed control cable cap from the speed control servo.
^
Push in the locking arm on the speed control cable cap then rotate the cap counterclockwise.