F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Blower Motor: Service and Repair
Auxiliary Climate Control
REMOVAL
1. Remove the access panel from the RH rear quarter trim panel.
2. Remove the blower motor.
1
Disconnect the electrical connector.
2
Remove the blower motor breather.
3
Remove the blower motor screws.
4
Remove the blower motor.
3. Remove the blower motor wheel from the blower motor.
1
Remove the push clip.
2
Remove the blower motor wheel.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Install a new push clip when reinstalling the blower motor wheel to the blower motor.