F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
5. Remove the screws and reposition the hood latch.
NOTE: Mark the location of the hood latch for realignment at assembly.
6. Remove the screws and remove the RH and LH A/C condenser core mounting brackets.
7. Lift out the A/C condenser core.
INSTALLATION
1. To install, reverse the removal procedure.
^
Install new O-ring seals lubricated in clean PAG oil.
^
Lubricate the refrigerant system with the correct amount of clean PAG oil.
2. Evacuate, leak test and charge the refrigerant system.
