ford Workshop Repair Guides

Ford Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Ambient Light Sensor: Service and Repair

PHOTOCELL

REMOVAL

1. Disconnect the battery ground cable.

2. Remove the photocell assembly.

-

Disconnect the electrical connector.

3. NOTE:  Take care not to break the retaining tabs.

Disengage the locking tabs and remove the photocell.

INSTALLATION

1. To install, reverse the removal procedure.

Lighting and Horns > Ambient Light Sensor > Component Information > Service and Repair

< PREV PAGE NEXT PAGE >