F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Vehicle Lifting: Technician Safety Information
If equipped, the electrical power to the air suspension system must be shut down prior to hoisting, jacking or towing an air suspension vehicle.
This can be accomplished by turning off the air suspension switch located below the glove box in the lower right of the front passenger footwell.
Failure to do so may result in unexpected inflation or deflation of the air springs which may result in shifting of the vehicle during these
Do not run the engine when jacking the vehicle. The wheels contacting the ground could cause the vehicle to move.
Make sure the jack is correctly positioned to prevent the vehicle from falling.
Wheel chocks should be used to prevent the vehicle from rolling and falling off the jack.
When raising a vehicle on a twin-post hoist, use extreme care positioning the hoisting forks to avoid interference with the plastic midship fuel