F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Wiper Arm: Service and Repair
Rear - Pivot Arm
WIPER PIVOT ARM - REAR
REMOVAL
1. CAUTION:Use care to protect the vehicle paint finish when carrying out this procedure or possible damage may occur.
Lift the rear wiper pivot arm cover.
2. Remove the rear wiper pivot arm.
1
Remove the nut.
2
Remove the rear wiper pivot arm.
3
Disconnect the rear window washer hose.
INSTALLATION
1. Operate the rear window wiper motor to the park position.
1
Turn key to RUN position.
2
Turn the rear window wiper switch to the INT 1 position.
3
Allow the rear window wiper motor to operate for at least one cycle.
4
Turn the rear window wiper switch to the OFF position.