F 250 4WD Super Duty V8-5.4L (2009)
Blower Motor Resistor: Service and Repair
Blower Motor Resistor
NOTE: Blower motor resistor shown, blower motor speed control similar.
Removal and Installation
1. Lower the glove compartment.
2. Detach the 2 heater core and evaporator core housing harness electrical connectors from the heater core and evaporator core housing.
3. Disconnect the blower motor resistor electrical connector.
4. Remove the 2 blower motor resistor screws.
5. Remove the blower motor resistor.
6. To install, reverse the removal procedure.
