F 250 4WD Super Duty V8-5.4L (2009)
3. Using a suitable jack, support the front axle assembly.
4. Remove and discard the front shock absorber lower bolt and flagnut.
-
To install, tighten the new bolt to 150 Nm (111 lb-ft).
5. Remove and discard the stabilizer bar link upper nut.
-
To install, tighten the new nut to 80 Nm (59 lb-ft).
6. Lower the axle and remove the spring.
7. NOTE: Inspect the spring upper and lower seats, install new as necessary.
To install, reverse the removal procedure.