F 250 4WD Super Duty V8-5.4L (2009)
Transmission Position Switch/Sensor: Service and Repair
TorqShift
Digital Transmission Range (TR) Sensor
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the selector lever cable end.
3. Remove the transmission fluid pan, gasket and filter. For additional information, refer to Fluid Pan, Gasket and Filter See: Automatic
Transmission/Transaxle/Fluid Filter - A/T/Service and Repair/Fluid Pan, Gasket and Filter.
4. Disconnect the Transmission Range (TR) sensor.
5. NOTE: The pin should be driven up through the manual valve.
Remove and discard the manual control valve detent lever shaft retaining pin.
6. Using the Roll Pin Set, remove the manual control lever shaft retaining pin.