F 250 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Fuel Injector Wiring Harness: Service and Repair
REMOVAL
1. Remove the valve covers.
2. Disconnect the electrical connectors from the glow plugs.
3. Disengage the attaching clip and remove the connectors from the fuel injectors.
4. Disconnect the electrical connectors from the valve cover gasket.
1
Remove the retaining clip.
2
Disconnect and remove the electrical connectors from the valve cover gaskets.
INSTALLATION
1. Follow the removal procedure in reverse order.