F 250 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
![background image](/ford/f_250_4wd_super_duty/v8-7.3l_dsl_turbo_vin_f/Page-1563004.png)
3. Seat the outer pinion bearing on the pinion.
1
Seat the inner pinion bearing into the cup by positioning a 152.4 x 152.4 x 152.4 mm (6 x 6 x 6 inch) block of wood under the pinion.
2
Place the original pinion preload spacer onto the pinion.
3
Place the outer pinion bearing onto the pinion.
4
Using a suitable press, seat the outer bearing on the pinion.
4. NOTE: Do not install the pinion seal at this time.
Using the special tool, install the pinion flange.