F 350 2WD Pickup V8-351 5.8L (1983)
Wheel Fastener: Customer Interest
Wheels- Lug Nuts Bind On Studs
Article No.
WHEEL - LUG NUTS BIND ON STUDS - VEHICLES
87-7-21
WITH 9/16" STUDS AND SINGLE REAR WHEELS
LIGHT TRUCK:
1983-87 E-250/350, F-250/350
ISSUE:
Some lug nuts may be difficult to remove due to nut crimping. The lug nuts are designed to be free-running as opposed to a "prevailing"
torque style. The freerunning nuts may have "crimped in" against the stud when torqued.
ACTION:
To correct this, use new replacement nuts which will not "crimp in" when tightened to the recommended torque of 140 ft.lbs. (190 N-m).
CAUTION: Lug nuts should be torqued by hand, not with an impact wrench, and retorqued at intervals specified in the Owner Guide.
PART NUMBER
PART NAME
CLASS
E7TZ-1120-A
Lug Nut - R.H. Thread
A
- Package of 4
E7TZ-1121-A
Lug Nut - L.H. Thread
A
- Package of 4
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual
OPERATION: SP870721A - Replace lug nuts
TIME:
0.5 Hr.
OPERATION: 1107B - Replace wheel studs
TIME:
Refer to the appropriate Service Labor Time Standards Manual
OPERATION: "M" Time - Replace lug nut stuck on spinning stud, if required
Requires District Authorization
DLR. CODING: Basic Part No. 1120 - Code: 41
