F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Seat Latch: Service and Repair
Rear Seat Back Latch
Crew Cab
REMOVAL
1. Remove latch-to-seat back attaching bolts or screws.
NOTE: Make sure that springs (one each side) rest against the bottom of the seat back and are hooked over the pawls on each end of the latch.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten upper latch assembly bolt to 25-43 N.m (18-32 Lb-Ft) and cushion-to-latch assembly to 24-36 N.m (18-27 Lb-Ft).
Except Crew Cab