F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
a. Position the brake pedal in the bracket.
b. Slide the clutch and brake pedal pivot shaft through the bracket and hub on the brake pedal.
c. Install brake and clutch pedal bushing and spring retainers on the clutch and brake pedal pivot shaft.
6. Place the brake and clutch pedal bushing, brake master cylinder push rod spacer, stoplight switch and brake master cylinder push rod onto the pin
on the brake pedal. Install the brake master cylinder push rod spacer and cotter pin.
7. Connect wires to stoplight switch. Check unit for correct operation.