F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Bulk hose will require some modification on vehicles with E4OD automatic transmissions because the T in the hose has a factory crimp for
retention to the tee.
INSTALLATION
1. Route the heater water hoses as shown in the Heater Hose Installation illustration.
2. Install the heater water hoses on their fittings and tighten the retaining clamps to 2-3 Nm (18-27 lb-in).
3. Fill and bleed the cooling system.
4. Check for coolant leaks and proper operation of the system.