F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
compressor with a lint free cloth to remove any oil and dirt.
4. Remove shaft seal retaining snap ring from inside compressor nose with Snap Ring Remover T89P-19623-DH as described in the following steps.
a. Insert the tip of the Snap Ring Remover T89P-19623-DH into one of the snap ring eyes.
b. Rotate the snap ring remover to position the tool tip and the snap ring eye closest to the compressor shaft.
c. Pull the snap ring remover up quickly while keeping the tool shaft against the side of the nose opening and remove the snap ring.