F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Fuel Injection Supply Manifold: Service and Repair
REMOVAL
1. Perform pre-service procedures. See: Service and Repair
2. Remove upper intake manifold.
3. Remove fuel line-to-fuel supply manifold retainer clips.
4. Disconnect vacuum hose at fuel pressure regulator.
WARNING: Perform the fuel pressure release procedure before disconnecting coupling.
5. Using Spring Lock Coupling Disconnect Tool T81P-19623-G1(3/8-Inch) or T81P-19623-G2 (1/2-Inch), disconnect fuel hoses at the fuel rail
supply tube and fuel rail return tube.
a. Fit tool to coupling so tool can enter cage to release garter spring.
b. Push the tool into the cage opening to release female fitting from garter spring.
c. Pull the coupling male and female fittings apart.
d. Remove the tool from the disconnected coupling.
6. Remove four fuel injection supply manifold retaining bolts.