F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
![background image](/ford/f_350_2wd_pickup/v8-460_7.5l_vin_g_efi/Page-144014.png)
4. Inspect the ABS harness and module connectors for corrosion and/or heat damage (See Figure 8).
5. If evidence of corrosion and/or heat damage is found in either the ABS harness or module connector call the Special Service Support Center for
further instructions.
6. If there is no evidence of corrosion and/or heat damage reconnect the ABS harness to the ABS module.
7. Is the speed control servo heat damaged?
^ If the speed control servo is heat damaged call the Special Service Support Center for further instructions.
^ If the speed control servo is not heat damaged no further action is required release the vehicle.