Testing and Inspection for Clutch Switch on F 350 2WD Pickup V8-460 75L VIN G EFI (1997)
Clutch Switch: Service and Repair
REMOVAL
1. Disconnect the wiring harness from Clutch Pedal Position switch (CPP).
2. Pull down on orientation clip to separate from switch tab.
3. Rotate clutch pedal position switch one-half turn to expose plastic retainer.
4. Push switch tabs together and slide retainer rearward and separate from clutch pedal position switch.
5. Remove clutch pedal position switch from clutch master cylinder push rod.
INSTALLATION
1. Follow the removal procedure in reverse order.