F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Radius Arm Bushing: Service and Repair
REMOVAL
1. Remove the lower shock absorber pivot bolt and compress the front shock absorber.
2. Remove the nut and washer retaining the radius arm to the radius arm bracket. Remove the outer insulator and spacer.
3. Move the radius arm and axle assembly forward out of the radius arm bracket.
4. Remove the inner insulator and retainer.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten radius arm-to-radius arm bracket nut to 113-153 Nm (83-113 ft. lbs.). Tighten shock bolt to 60-80 Nm (44-59 ft. lbs.).