F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Rear Spring With Auxilliary Spring
REMOVAL
1. Raise the vehicle frame until the weight is off the rear springs, with the tires still touching the floor.
2. Remove the nuts from the spring U-bolts and drive the U-bolts from the U-bolt rear spring plate.
3. Remove the auxiliary spring and spacer, if so equipped.
4. Remove the spring-to-bracket nut and bolt at the front of the rear spring.
5. Remove the shackle lower nuts and bolts at the rear of the rear spring.
6. Remove the rear spring and rear spring shackle from the rear spring shackle bracket.
7. Remove the bolt and nut that secures the rear spring shackle to the rear spring.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten the spring U-bolt nuts to specifications. Tighten the front spring bolt and nut and the rear shackle bolts and nuts to specifications.
