ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Center Support Clutch|Page 5139 > < Center Support Clutch|Page 5137
Page 7
background image

8. Install the coast clutch pressure plate retainer snap ring.

9. Using a feeler gauge, check the stack-up clearance in three places, 120 degrees apart.

-

If the clearance is not to specification, install the correct coast clutch pressure plate retainer snap ring and recheck the clearance. 

10. Install the overdrive sun gear, with the short end of the gear downward.

Direct Clutch

NOTE: MERCON Automatic Transmission Fluid is being replaced by MERCON V as a service fluid.

Center Support Clutch|Page 5139 > < Center Support Clutch|Page 5137