F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
3. Remove the 2 interlocking cast iron forward clutch cylinder seals.
4. Remove the selective forward clutch pressure plate retaining ring.
5. Remove the (A) top forward clutch pressure plate, the (B) clutch pack (3- or 4- plate, depending on vehicle application), the (C) forward clutch
pressure spring and the (D) bottom forward clutch pressure plate.
NOTE: Tag the parts for identification during installation.
6. Remove the forward clutch piston return spring retaining ring.
