F 350 2WD Pickup V8-7.3L DSL (1988)
Brake Caliper: Service and Repair
Removal
For additional information see Removal Notes. See: Fundamentals and Basics
1. To avoid overflow when the caliper pistons are compressed into the caliper pistons bores, remove a portion of brake fluid from master cylinder
disc brake reservoir. Properly dispose the removed fluid.
2. Raise and support vehicle. Remove wheel and tire assembly.
Bottoming Caliper Piston
3. Install an appropriate size C-clamp on caliper. Tighten clamp to bottom caliper pistons in cylinder bores. Remove the clamp.
NOTE: Do not use screwdriver or other edged tool to pry pistons from rotor.
