F 350 2WD Pickup V8-7.3L DSL (1988)
Ball Joint Service
Ball Joint Service
INSTALL
NOTE: Lower ball joint must be installed into the spindle first.
1. To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and
D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint
is seated.
CAUTION: Do not heat the ball joint or axle to aid in installation.
2. Install the snap ring onto the ball joint.
3. To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4. Install the spindle and ball joint assembly
