F 350 2WD Pickup V8-7.3L DSL (1988)
Wiper Gear Box: Service and Repair
1.
Disconnect battery ground cable.
2.
Remove both wiper arm and blade assemblies.
3.
Remove cowl grille attaching screws and raise the grille slightly.
4.
On E-Series models, remove washer jest from cowl vent grilles.
5.
On Bronco and F-Series, disconnect windshield washer fluid hose.
6.
On all models, remove cowl grille.
7.
Remove clip securing right and left linkage and the retaining clip from wiper motor arm.
8.
On E-Series models, remove wiper motor attaching bolts, then remove.
9.
On all models, remove pivot body-to-cowl panel attaching screws, then the arm and pivot shaft assembly.
10.
Reverse procedure to install.