F 350 2WD Super Duty V10-6.8L (2009)
Tailgate Latch: Service and Repair
Tailgate Latch
Tailgate Latch
Removal and Installation
1. Open the tailgate.
2. Remove the screws, retaining clips (if equipped) and the tailgate access panel.
3. Disconnect the tailgate latch remote control actuating rods.
4. Remove the 2 bolts and the tailgate latch.
-
To install, tighten to 25 Nm (18 lb-ft).
5. To install, reverse the removal procedure.
-
If necessary, use multi-purpose grease spray to lubricate the latches.