F 350 2WD Super Duty V10-6.8L VIN S (1999)
Valve Cover: Service and Repair
Right Side
Removal
1. Disconnect the battery ground cable.
2. On MOTORHOME chassis, remove the clamp and oil filler hose from the valve cover.
3. Disconnect the crankcase ventilation tube from the valve cover.
4. Disconnect the RH fuel injector electrical connections and the RH ignition coil electrical connections.
5. Disconnect the vapor management valve vacuum hose and vacuum canister vacuum harness and lift the fuel charging wiring off the valve cover
studs.