F 350 2WD Super Duty V10-6.8L VIN S (1999)
Torx Bit Tool Set Used For T55 "Torx Plus" Bit
Special Tool(s)
REMOVAL
1. Remove the safety belt buckle.
1
Use the T-55 Torx bit to remove the safety belt buckle bolt.
2
Remove the safety belt buckle.
2. Remove the safety belt tongue.
1
Use the T-55 Torx bit to remove the safety belt tongue bolt.
2
Remove the safety belt tongue.
INSTALLATION
NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure to tighten bolts to specification.