F 350 2WD Super Duty V10-6.8L VIN S (1999)
5. Remove the OTA cooler.
^
Position a drain pan under the OTA cooler.
^
Disconnect the fluid cooler tubes.
^
Remove the OTA fluid cooler.
Installation
1. Connect the fluid cooler tubes.
2. Install the lower bolts.
3. Install the front skid plate if equipped.
4. Lower the vehicle.
5. Install the upper bolts.
^
Insert a long extension and socket between the front grille and the bumper.
^
Install the upper bolt.
6. Fill the transmission to the proper level with specified fluid.
