F 350 2WD Super Duty V10-6.8L VIN S (1999)
Transmission Mount: Service and Repair
Special Tools
Removal
NOTE: 4x2 shown, 4x4 similar.
1. Raise the vehicle on a hoist.
2. Remove the nuts.
3. Install the High Lift Transmission Jack with the Transmission Jack Adapter to the transmission.
4. CAUTION: Be sure not to raise the back of the transmission too high, if it makes contact with the underbody, damage to the TSS and
OSS sensors will occur.
Remove the rear transmission mount.
1
Raise the transmission up off the rear crossmember support.
2
Remove the bolts.
