F 350 2WD Super Duty V10-6.8L VIN S (1999)
![background image](/ford/f_350_2wd_super_duty/v10-6.8l_vin_s/Page-1202002.png)
5. CAUTION: Prevent the front of the valve body separator plate from sagging and displacing the check balls.
If the valve body separator plate is not being serviced:
1
Remove the bolt.
2
Install the bolt into any case threaded bolt hole on the opposite end of the separator plate.
6. Remove the main control valve body assembly.
1
Remove the bolts.
2
Remove the nuts.
3
Remove the main control valve body.