Removing and Installing the Flywheel for F 350 2WD Super Duty V10-68L VIN S (1999)
Flywheel: Service and Repair
Removal and Installation
Removal
1. Remove the disc and pressure plate.
2. Use Dial Indicator/Magnetic Base to inspect flywheel runout.
3. CAUTION: Two bolts should be loosened but left in position to prevent the flywheel from falling.
Remove the bolts.
4. Press the flywheel off the crankshaft.
^
Install two bolts in the threaded holes in the flywheel.
5. Remove the two bolts remaining in the crankshaft.
6. Remove the flywheel.
Installation