F 350 2WD Super Duty V10-6.8L VIN V (2005)
7. NOTE:
-
Do not reuse body support mounting fasteners. New fasteners must be installed for each fastener that has been removed or loosened.
-
No lubricants of any kind are to be used during body insulator installation.
To install, reverse the removal procedure.
Body Support - Middle, Crew Cab, Lower
BODY SUPPORT-MIDDLE, CREW CAB, LOWER
Removal and Installation
1. Move the front seat forward.
2. Remove the rear door cowl side trim panel (02345).
3. Pull the carpet or mat back to expose the middle body insulator button plug.
4. Remove the plug.
5. Remove and discard the bolt.
