F 350 2WD Super Duty V10-6.8L VIN V (2005)
Position the seat cushion. Install the four seat cushion bolts.
Power seats
2. Connect the power seat switch electrical connector and the seat actuator motors electrical connector. Attach the connectors to the cushion pan.
3. Attach the three trim support wire screws that secure the trim cover side face to the seat track riser.
4. Position the seat control switch on the side trim panel. Install the two screws.
Heated seats
5. Attach the components to the seat cushion pan. Connect the heated seat element electrical connectors.
6. Connect the heated seat switch electrical connector.
