F 350 2WD Super Duty V10-6.8L VIN V (2005)
Brake Caliper: Service and Repair
Brake Caliper Anchor Plate, Rear
Brake Caliper Anchor Plate
Removal
1. Remove the brake pads.
2. Remove the bolts and the brake caliper anchor plate.
Installation
1. Position the brake caliper anchor plate and install the 2 brake caliper anchor plate bolts.
^
For F-250, F-350 single rear wheel caliper, tighten to 275 Nm (203 ft. lbs.).
^
For F-350 dual rear wheel caliper, tighten to 275 Nm (203 ft. lbs.).
^
For F-450, F-550 dual rear wheel caliper, tighten to 400 Nm (295 ft. lbs.).
2. Install the brake pads.
