F 350 2WD Super Duty V10-6.8L VIN V (2005)
19. The number 6 cylinder camshaft exhaust lobe must be coming up on the exhaust stroke. Verify by noting the position of the 2 intake camshaft
lobes and the exhaust lobe on the number 6 cylinder.
20. Using the special tool, install the 3 originally removed roller followers.
21. CAUTION: Only use hand tools to install the camshaft phaser sprocket assembly or damage may occur to the camshaft or camshaft phaser unit.
CAUTION: Damage to the camshaft phaser sprocket assembly will occur if mishandled or used as a lifting or leveraging device.
Tighten the camshaft phaser bolt in 2 stages:
^
Stage 1: Tighten to 40 Nm (30 ft. lbs.).
^
Stage 2: Tighten an additional 90 degrees.
